Premières impressions du Datamask Oceanic

un article (en anglais désolé) sur la développement du Datamask chez Oceanic

DEVELOPMENT STORY

Introduction
Special Operations Forces (SOF) divers typically consist of US Navy SEALs, Marine RECON, US Army Combat Swimmers, and US Air Force Combat Controllers. Their missions are often conducted in areas of extremely poor water visibility, such as harbors, rivers, and the coastal zone. SOF divers operating in these regions use specialized underwater breathing apparatuses (UBAs); such as the US Navy MK-25, or the MK-16 mixed-gas rebreather. SOF personnel may also employ a variety of underwater sensors including compasses, handheld sonars, and hydrographic survey systems that require the use of both hands during operation. Reading critical life support and UBA status from depth gauges, dive watches, pressure gauges, or wrist-worn displays can be nearly impossible under extremely poor visibility conditions - even with luminous dials or auxiliary lighting. The inability to accurately monitor current dive status can lead to a life-threatening situation in many cases. SOF divers need the capability to monitor this data regardless of water visibility, lighting, or other environmental conditions - all while remaining clandestine.

The purpose of the IDDM project was to develop an integrated diver display mask that could provide SOF divers this needed capability, and from which other diving applications could be ultimately developed.

Design Mission & Basic IDDM Requirements
The SOF Combat Swim Mission, along with CSS's experience in military dive operations and underwater systems design, was used to develop operational, functional, and technical requirements for the IDDM. These requirements helped define the environmental, human factors, technical, and operational modes of the IDDM.

Within the SOF Combat Swim Mission, the masked-based display information would need to be viewed occasionally during a mission (i.e. the diver periodically checking status of depth, time and cylinder pressure for 5 -10 seconds at a time). The display could not interfere with the diver's normal field-of-view through the mask while in use. These two developed requirements helped establish the physical location of the display in the periphery of the diver's vision within the mask frame. Based on eyestrain considerations and available space, the lower right section of the mask frame was selected. In this location, the diver could visually access the information by glancing downward and slightly to the right.

Integrated Systems Engineering: Mechatronics Approach
Today the design, development and manufacture of underwater technologies takes place in an increasingly multidisciplinary environment where the system elements are a mixture of mechanical, electronic, control, and software components. New products and systems based on the integrated application of mechanical, electronic and software engineering technologies often demonstrate reduced mechanical complexity, increased performance, and unique capabilities previously thought unattainable.

To achieve these results an integrated systems engineering, or mechatronics approach to design and development is needed. Mechatronics is the multi-disciplinary integration of mechanical, electronic, and software control systems.

To design and develop the IDDM system required the integrated application of an array of multidisciplinary subsystems; including miniature LCDs, transducers, optics, electronics, RF data transmission, and imbedded software control. Our approach was to assemble a multidisciplinary technical team comprised of Oceanic and military engineers, use the best available and custom developed technologies; and implement an integrated systems engineering, or mechatronics design and development process.

To make the extreme modifications necessary to a basic mask frame, it was essential to build a digital 3D parametric solid model of the frame. All subsequent design changes could then be made within a virtual design environment. The solid model was constructed using Pro/Engineer ä design software and allowed different concepts, approaches and hardware solutions to be tested in the virtual design environment before committing to prototype production. This solid model was the foundation for the IDDM system from which operational prototypes were produced.

Miniature Liquid Crystal Display Screen
The display used in the mask is a custom designed miniature segmental liquid crystal display. This display technology was selected because it is a mature technology successfully used in many existing underwater applications (such as dive computers), possesses inherent reliability and ruggedness, and has a low power requirement with the possibility of extreme miniaturization. In order to combine the needed information on to a single screen that would fit integrally within the mask frame, it was necessary to approach the industry limit for miniaturization of segmental LCD technology.

The physical size of the display (0.375-inch [9.52mm] diameter viewing area), primary characters (0.075-in [1.9mm] height), and annunciators (0.029-inch [0.75mm]) actually makes them unreadable close to the eye without magnification. This necessitated developing a unique optical system to provide the required magnification.

Optical Design
The extremely small physical size of the display characters is such that they cannot be viewed close to the eye without high magnification. To help determine the minimum acceptable magnification, the displayed characters in existing dive computers were used as a reference point. Through limited subject testing using primarily Navy personnel (30 test subjects) we established a comfortable viewing reference distance of 10 inches (254mm). Approximately 75% of subjects tested could comfortably read alpha-numeric text height of 0.25-in (6.35mm) at the reference distance. More than 90% of test subjects could comfortably read text height of 0.375-in (9.5mm) at the same distance. This included test subjects who normally used glasses for reading. An additional margin was added to the test data results, and a minimum optical magnification requirement for the IDDM was established as 0.50-in (12.7mm) primary character height at the reference viewing distance.

Initially, we tested a large number of commercially available lenses with widely varying performance. Our best results were realized using a 0.86-in (21mm) diameter x 10X magnification lens that met all our basic optical requirements for magnification, eye relief, and physical size with acceptable distortion.

To determine if the optical performance could be significantly improved, we retained a leading optical design firm to design a custom lens with improved characteristics over the commercially available lens. The custom solution surpassed our technical requirements in all areas - providing a 14X magnification (0.625-in [15.8mm] primary character height at 10-in [254mm] viewing distance). Additional analysis showed that this system would also provide sharper images with less distortion at the edges of the viewing area.

Optical Alignment
The optical assembly components (lens, display, and backlight) must stay precisely aligned along a center-viewing axis relative to each other and with precise spacing between components. This center-viewing axis extending from the diver's eye is perpendicular to the lens surface. The diver views the magnified display by shifting the eye downward and slightly to the right. Two additional variables affect the diver's ability to view the display within the mask. The distance between the diver's eyes, or interpupillary distance (IPD), affects the alignment of the diver's eye to the lens. The diver's face shape also affects viewing alignment since it determines the way the mask fits on the diver's face. This required the design of a fixed alignment mount that could accommodate as many different divers as possible, despite varying IPDs and face shapes. Finding the optimum location and alignment angle for a fixed mount system was a considerable challenge, requiring extensive trial and error, and human factor subject testing.

After completing extensive testing using prototype masks with various alignment positions, the optimum alignment angle was achieved and incorporated into the digital 3D solid mask model.

Embedded Electronic Control
The IDDM embedded electronic system is a combination of electronics, sensors, electromechanical hardware, and controlling software. This distributed system processes the sensor data and presents it to the diver's display screen.

Through several iterations of integrating electromechanical and industrial design requirements, a well-balanced frame design with a natural distribution by function of the electronic, mechanical, and optical system components was developed.

The embedded electronic control system is located within this frame design and distributed in four subsystems: the controller, the display, the RF receiver, and the battery.

Rapid Prototyping and Manufacturing
To produce interim and final prototype masks with such a complicated mechanical design it was essential to use state-of-the-art rapid prototyping techniques. Several interim prototype versions of the IDDM were produced using a process called stereolithography in order to test human factors, optical alignment, backlight intensity, and system integration. Stereolithography uses proprietary photo-reactive liquid polymer resins and ultraviolet laser light to produce functional prototypes from the digital 3D solid models.

Other Diving Applications
Military Special Operations:
The miniature display screen and control software can be customized for the specific diving apparatus and mission profile, with SOF combat swimmers able to monitor critical life support and mission data inside the dive mask - regardless of poor environmental conditions.

An IDDM system could also be modified for the US Navy MK-16 or similar UBA for use by EOD divers. Adapting the IDDM into a full facemask configuration is also possible. This future integrated full facemask system could potentially provide the EOD diver with depth, bottom time, cylinder pressure, oxygen level (PPO 2 ), and battery status without large wrist-mounted displays.

Recreational and Technical Divers:
An increasing number of civilian divers (deep, wreck, cave, photographers, and marine biologists) are using enriched air, other mixed-gasses, and commercially available rebreathers to extend dive time at depth, and reduce decompression obligations. A modified version of the IDDM could similarly provide enhanced safety and effectiveness for these applications.

Public Safety Divers:
These divers typically perform rescue and recovery operations in environmental conditions with little or no visibility. Police and other specialist divers may be required to operate special equipment (such as hand held sonars), or perform special missions, which make monitoring critical life support data very difficult. A custom IDDM could enhance safety and mission effectiveness here.

Handicapped or Physically Challenged Divers:
A growing number of handicapped, or physically challenged individuals are entering the realm of recreational diving. Organizations such as the Handicap Scuba Association International and the International Association of Handicapped Divers specialize in training handicapped individuals to scuba dive. One challenge for instructors is enabling the handicapped diver to monitor his or her depth, bottom time and cylinder pressure. This is difficult since many times the handicapped diver cannot manipulate limbs into a position to view gauges, dive computers, watches, or consoles. In these instances the handicapped diver must rely solely on his or her dive buddy to monitor life support data. An IDDM would allow the handicapped diver an added level of control, confidence, and peace of mind by allowing direct monitoring of dive data.

Jolie étude non ?
_________________
Memento audere semper : souviens-toi d'oser toujours

très sympa cet historique R&D!!!!
_________________
Fabrice (in the mix)
"Il existe deux sortes de navires, le sous-marin et la cible"

terminons ce tour d'horizon du Datamask pour signaler qu'il est aussi commercialisé par la marque Aeris qui est en fait une marque propriétée d'Oceanic : ici vendu sous le nom de CompuMark

pour jeter un coup d'oail a cette marque non distribuée en France : http://www.diveaeris.com
_________________
Memento audere semper : souviens-toi d'oser toujours

Passionnant !

Merci JM.

mirza
_________________

... j'aime bien me mettre sur le dos... j'vois mes bulles qui r'montent et c'est beau...

Pour ceux qui en rêve, il me semble en avoir appercu un qui traîne sur la baie.....vite !!!!!!

Wow, même à la mise à prix, c'est vraiment cher ! Faudra que ça baisse, sinon ça ne se vendra pas

eh bin jm javais zappé ce post Embarassed

mince t as cassé la tirelire ...
ca c est vraiment une sacre inovation et pour un look de warrior !!!
bon par contre le prix ..... je reste reveur !
peut etre est ce la plongée du futur ?
bah jm je te vois venir ...
le masque maintenant et ......................
le CCR dans combien quelques mois ?
la ce coup ci il va falloir inventer la connexion web sous marine car le grand chef ...... bin y vas y passer du temps sous l eau !
franchement on est pas bien sous l eau ?
moi je dis oui ..... :right:

en tous les cas bel achat ca doit etre curieux a apprehender .
vincent

un p'tit "UP" après une quinzaine de plongées mer avec le Datamask : j'en suis toujours très content, il est vrai que la limitation relative du champs de vision est le défaut de ce masque, mais sinon que du bonheur !

j'ai volontairement durcis l'algorithme de déco du Datamask pour "coller" avec celui du Suunto, et comme j'ai plongé avec la D6 j'ai pu comparer : les temps annoncés sont identiques que cela soit sur des plongées sans déco (limite du "non deco time" dans la même minute) que sur des plongées a déco longue (la plus longue déco du séjour fut une 2 min a 6 m + 14 min a 3 m)

sur les plongées profondes et donc relativement sombre la lisibilité des paramètres est un vrai plaisir surtout pour un presbyte léger comme moi, et pendant les longues remontées dans le bleu l'affichage de la profondeur juste dans le champs de vision est un plaisir

par contre le Datamask n'est pas un multigaz commutable en plongée donc pour les décos au Nitrox c'est soit faire les paliers "air' (ce que nous faisons avec Marie) soit plonger en mode "gauge" mais dans ce cas le Datamask n'affiche pas les paramètres de déco
_________________
Memento audere semper : souviens-toi d'oser toujours

Je l'ai mis sur le visage il y a 2 ou 3 semaines (sans plonger mais allumé), c'est vrai que c'est une bonne surprise en terme de lisibilité!
_________________
Lady Beach